Photovoltaic PV Solar System 1000V DC 10X38 Fuse Holder Fuse Box Base Link

Photovoltaic PV Solar System 1000V DC 10x38 Fuse Holder Fuse Box Base Link 1 . Use This series of fuses is suitable for

DESCRIPTION

Basic Info.

Model NO.	PV-32 2P
Origin	China
HS Code	9029109000
Production Capacity	10000PCS/Month

Product Description

Photovoltaic PV Solar System 1000V DC 10x38 Fuse Holder Fuse Box Base Link

1 . Use This series of fuses is suitable for lines with rated DC voltage up to 1000V and rated current up to 32A, with photovoltaic panels and storageThe battery is connected in series and connected in parallel to make short-circuit protection for the charging and converter system; at the same time, the photovoltaic power station, the convergent inverter rectification system and the short Road fault breaking protection; and doing photovoltaic power system surge current and short circuit fault over voltage fast breaking protection, rated breakingThe capacity is 20KA, and our company is now doing related tests to improve the breaking capacity of the products. The products are in line with international power.Working Committee Standard IEC60269-1/IEC60269-6

2 . Normal working conditions
The upper limit of ambient air temperature does not exceed 90 °C; the lower limit of ambient air temperature is not lower than -40 °C; the altitude of the installation site is not exceeded
After 2000m (if you want to exceed this 2000m, you need to specify the requirements, the company can manufacture according to customer requirements).

3. Use category
"gPV" denotes a DC fuse for the full range breaking capability of the solar photovoltaic system for overcurrent protection.

4 . Structural features
A variable-section melt made of pure silver sheet is encapsulated in a fusion tube made of high-strength porcelain, which is filled with chemically treated
The high-purity quartz sand and special treatment chemicals are used as the arc extinguishing medium, and the two ends of the melt are firmly connected to the end cap by spot welding.

5. Main technical parameters

Solar PV Protection gPV Protection Fuse linkRated voltage:1000VDCRated breaking capacity:20kAStandard specification:IEC60269-6 Class:gPV

Item	Rated Current	Rated Voltage	Energy Integrals Pt (A3s)		Watts Loss(W)
			Pre-Arcing	[email protected]	0.8In	In
10*38 gPV	1A	1000VDC	0.15	0.4	0.8	1.5
	2A	1000VDC	1.2	3.4	0.6	1.0
	3A	1000VDC	4	11	0.8	1.3
	4A	1000VDC	9.5	26	1.0	1.5
	5A	1000VDC	19	50	1.0	1.6
	6A	1000VDC	30	90	1.1	1.8
	8A	1000VDC	3	32	1.2	2.1
	10A	1000VDC	7	70	1.2	2.3
	12A	1000VDC	12	120	1.5	2.7
	15A	1000VDC	22	220	1.4	2.9
	20A	1000VDC	34	350	2.1	3.6
	25A	1000VDC	325	1860	1.65	2.91

Solar PV Protection Fuse Holder for gPV Fufse link
Rated voltave:1000VDC
Standard specification: IEC60269-6

Pole	1P 2P 3P 4P
Rated voltage(V DC)	1000
Rated current(A)	1A 2A 3A 4A 5A 6A 8A 10A 12A 15A 20A 25A
Rated breaking capaticy(kA)	20
The most high power consumption(W)	3.5
Connection and Installation
Connection(mm2)	2.5-10
Working temperature (ºC )	-30~+70
Resistance	Class2
Altitude(m)	≤2000
Relative humidity	≤95%
Protection class/degree	IP20
Pollution	3
Installation enviroment	No obvious shock and vibration
Installation class	Class III
Installation type	DIN rail